ULTRASONIC SENSOR(for Rear) REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE ULTRASONIC SENSOR CLIP

    B001ESQ

    Tech Tips

    Use the same procedure to remove the ultrasonic sensor clip on the other side.


    1. Detach the claws and remove the ultrasonic sensor clip.

  3. REMOVE REAR CORNER ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure to remove the rear corner ultrasonic sensor on the other side.


    1. Disconnect the connector.

    2. B001ICQ

      Detach the 2 claws and remove the rear corner ultrasonic sensor.

      Note

      Before removing the ultrasonic sensor, make sure to mark the ultrasonic sensor and front bumper cover so that each ultrasonic sensor can be returned to its original position.

  4. REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure to remove the rear corner ultrasonic sensor retainer on the other side.


    1. Using a heat light, heat the rear bumper cover.

      Standard
      Item Temperature
      Rear Bumper Cover 40 to 60°C (104 to 140°F)

      CAUTION:

      B001EEYC01
      *a Heated Part
      *b Heat Light

      • Do not touch the heat light and heated parts.

      • Touching the heat light may result in burns.

      • Touching heated parts for a long time may result in burns.

      Note

      Do not heat the rear bumper cover excessively.

    2. B001DC7

      Remove the rear corner ultrasonic sensor retainer.

  5. REMOVE REAR CENTER ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure described for the rear corner ultrasonic sensor.

  6. REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure described for the rear corner ultrasonic sensor retainer.