ULTRASONIC SENSOR(for Rear) REMOVAL

PROCEDURE

1. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

   Click here

2. REMOVE JACK BOX HOLE COVER

   Click here

3. REMOVE REAR BUMPER BAR PLATE

   Click here

4. REMOVE BACK DOOR CHECK

   Click here

5. REMOVE NO. 1 REAR BUMPER PLATE

   Click here

6. REMOVE REAR QUARTER PANEL MUDGUARD LH

   Click here

7. REMOVE REAR QUARTER PANEL MUDGUARD RH

   Tech Tips

   Use the same procedure described for the LH side.

8. REMOVE REAR BUMPER COVER (for 5 Door)

   Click here

9. REMOVE REAR BUMPER COVER (for 3 Door)

   Click here

10. REMOVE ULTRASONIC SENSOR CLIP

    

    Tech Tips

    Use the same procedure to remove the ultrasonic sensor clip on the other side.

    
    

    1. Detach the 4 claws and remove the ultrasonic sensor clip.

11. REMOVE NO. 1 ULTRASONIC SENSOR

    

    Tech Tips

    Use the same procedure to remove the No. 1 ultrasonic sensor on the other side.

    
    

    1. Disconnect the connector.

    2. Detach the 2 claws and remove the No. 1 ultrasonic sensor.

12. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

    

    Tech Tips

    Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.

    
    

    1. Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer.