MULTI-TERRAIN MONITOR SYSTEM, Diagnostic DTC:C164D

DTC Code DTC Name
C164D Wheel Speed Sensor Malfunction

DESCRIPTION

This DTC is stored when the parking assist ECU receives a wheel speed sensor abnormality signal from the vehicle stability control system via CAN communication.

DTC Code DTC Detection Condition Trouble Area
C164D Wheel speed sensor malfunction. Vehicle stability control system

CAUTION / NOTICE / HINT

Note


  • When "!" mark is displayed on the navigation receiver assembly*1 or radio and display receiver assembly*2 after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here


    • *1: for Navigation Receiver Type

    • *2: for Radio and Display Type

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the multi-terrain monitor system may be needed.

    Click here

  • The multi-terrain monitor system troubleshooting procedure is based on the premise that the vehicle stability control system is operating normally. Check the vehicle stability control system first before troubleshooting the multi-terrain monitor system.

    for Vacuum Brake Booster

    Click here

    for Hydraulic Brake Booster

    Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      OK
      DTC C164D is not output.

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    GO TO VEHICLE STABILITY CONTROL SYSTEM for Vacuum Brake Booster: GO TO VEHICLE STABILITY CONTROL SYSTEM Click here
    GO TO VEHICLE STABILITY CONTROL SYSTEM for Hydraulic Brake Booster: GO TO VEHICLE STABILITY CONTROL SYSTEM Click here