MULTI-TERRAIN MONITOR SYSTEM, Diagnostic DTC:U1000

DTC Code DTC Name
U1000 CAN Communication Failure (Message Registry)

DESCRIPTION

This DTC is stored if there is a malfunction in the parking assist ECU.

DTC Code DTC Detection Condition Trouble Area
U1000 ECU malfunction Parking assist ECU

CAUTION / NOTICE / HINT

Note


  • When "!" mark is displayed on the navigation receiver assembly*1 or radio and display receiver assembly*2 after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here


    • *1: for Navigation Receiver Type

    • *2: for Radio and Display Type

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the multi-terrain monitor system may be needed Click here.

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      OK
      DTC U1000 is not output.

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    REPLACE PARKING ASSIST ECU for LHD: REPLACE PARKING ASSIST ECU Click here
    REPLACE PARKING ASSIST ECU for RHD: REPLACE PARKING ASSIST ECU Click here