CLEARANCE WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 CLEARANCE WARNING BUZZER

   
   

   1. Attach the clamp to install the No. 1 clearance warning buzzer.

   2. Connect the connector.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY (w/ Navigation System)

   Click here

3. INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

   Click here

4. INSTALL RADIO TUNER OPENING COVER (w/o Audio)

   Click here

5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Navigation System)

   Click here

6. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

   Click here

7. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

   Click here

10. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

11. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

    Click here

12. INSTALL INSTRUMENT SIDE PANEL LH (for LHD)

    Click here

13. INSTALL COWL SIDE TRIM BOARD LH (for LHD)

    Click here

14. INSTALL DOOR SCUFF PLATE ASSEMBLY LH (for LHD)

    Click here

15. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

16. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

17. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Click here

18. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

19. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

    Click here

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

21. CHECK SRS WARNING LIGHT

    Click here