REAR VIEW MONITOR SYSTEM(for Radio and Display Type) HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips

Use these procedures to troubleshoot the rear view monitor system.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT
  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

    NEXT
  3. CHECK DTC OF NAVIGATION SYSTEM OR AUDIO AND VISUAL SYSTEM


    1. w/ Navigation System:

      Refer to DTC Check/Clear procedures of the navigation system.

      Click here

    2. w/o Navigation System:

      Refer to DTC Check/Clear procedures of the audio and visual system.

      Click here

      Result
      Result Proceed to
      DTC is not output A
      DTC is output (w/ Navigation System) B
      DTC is output (w/o Navigation System) C

    B
    C
    A
  4. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom occurs B

    B
    A
  5. SYMPTOM SIMULATION

    Result
    Proceed to
    NEXT

    NEXT
  6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM OR AUDIO AND VISUAL SYSTEM


    1. w/ Navigation System:

      Refer to navigation system.

      Click here

    2. w/o Navigation System:

      Refer to audio and visual system.

      Click here

      Result
      Result Proceed to
      Symptom does not appear A
      Symptom appears B

    B
    A
  7. PROBLEM SYMPTOMS TABLE


    1. Refer to the Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Fault is not listed in problem symptoms table A
      Fault is listed in problem symptoms table B

    B
    A
  8. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW


    1. Terminals of ECU

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  9. ADJUST, REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT
  10. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT