SIDE MONITOR SYSTEM DIAGNOSIS SYSTEM


  1. SIDE MONITOR DIAGNOSIS SYSTEM


    1. For side monitor system diagnosis, signals received by the parking assist ECU can be checked and the side monitor system can be calibrated, adjusted and checked using the multi-display assembly.

      Note

      Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the side monitor system may be needed Click here.

      Tech Tips

      The displayed screens and items may differ depending on vehicle specifications.

  2. DIAGNOSIS SCREEN TRANSITION (during parking assist ECU initialization)

    B001D82E01
    *1 Start the diagnostic mode referring to the navigation system or audio and visual system
    B001DC9

  3. DIAGNOSIS SCREEN TRANSITION (after parking assist ECU initialization)

    B001FR3E01
    *1 Start the diagnostic mode referring to the navigation system or audio and visual system
    B001CSX

  4. DIAGNOSTIC MODE


    1. Start diagnostic mode.


    2. Failure diagnosis.


    3. B001F8Z

      System check (check using system check mode screen).


    4. Finish diagnostic mode.


  5. SIGNAL CHECK (parking assist ECU input signal)


    1. Start diagnostic mode.



      1. B001CYJ

        Select "Function Check/Setting" on the "Service Menu screen" to display the Function Check/Setting screen.

      2. B001ESL

        Select "Camera Setting" on the "Function Check/Setting I" screen.

        Tech Tips

        After "Camera Setting" is selected, the screen transitions differ depending on whether initialization of the parking assist ECU was performed after parking assist ECU replacement.

        Parking Assist ECU Initialization Screen Transition
        Not performed "Signal Check" screen
        Performed "Mode Setting" screen
      3. B001CUE

        When the screen changes to the "Mode Setting" screen, select "Back Camera Setting" to display the "Signal Check" screen.

        Tech Tips

        To select a grayed out item, select and hold the item for 2 seconds or more.

    2. Start diagnostic mode.



      1. B001CYJ

        Select "Function Check/Setting" on the "Service Menu" screen to display the "Function Check/Setting" screen.

      2. B001ESL

        Select "Camera Setting" on the "Function Check/Setting I" screen.

        Tech Tips

        After "Camera Setting" is selected, the screen transitions differ depending on whether initialization of the parking assist ECU was performed after parking assist ECU replacement.

        Parking Assist ECU Initialization Screen Transition
        Not performed "Signal Check" screen
        Performed "Mode Setting" screen
      3. B001CUE

        When the screen changes to the "Mode Setting" screen, select "Back Camera Setting" to display the "Signal Check" screen.

        Tech Tips

        To select a grayed out item, select and hold the item for 2 seconds or more.

    3. B001DFZ

      Signal Check:


      1. On the "Signal Check" screen, it is possible to inspect the state of signals sent to the parking assist ECU and check the settings.

        Item Inspection Detail Note
        CAN CAN signal input When "CHK" (red) is displayed, selecting "Next" will not change to the next screen.
        SHIFT Shift position signal input
        CAMERA SW Front and side monitor main switch signal input
        MIRROR SW Outer rear view mirror retract signal input
        HANDLE Steering position signal input
        DEST Destination code signal input
        BODY Vehicle body information input
        T/M Transmission signal input
        D-CAM SET Driver side camera information signal input

        Tech Tips


        • When "CHK" (red) is displayed, perform inspections based on the result of the following inspections.

        • If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".

    4. CAN inspection:

      Tech Tips

      If "CHK" (red) is displayed for "CAN", check for DTCs and perform troubleshooting based on the output DTCs Click here.

    5. SHIFT inspection:

      Tech Tips

      If "CHK" (red) is displayed for "CAN", check for DTCs and perform troubleshooting based on the output DTCs Click here.

    6. CAMERA SW inspection:


      1. Check that "OK" (blue) is displayed for "CAMERA SW" and select "OK".

      2. Check that "OK" (blue) changes to "CHK" (red). Press the front and side monitor main switch assembly and check that "CHK" (red) returns to "OK" (blue).

        Tech Tips

        If "CHK" (red) remains displayed or the "CAMERA SW" inspection result is not normal, perform troubleshooting according to Problem Symptoms Table ("CHK" message(s) are displayed on the "Signal Check" screen) Click here.

    7. MIRROR SW inspection:


      1. Check that "OK" (blue) is displayed for "MIRROR SW" and select "OK".

      2. Check that "OK" (blue) changes to "CHK" (red). Press the outer mirror switch and check that "CHK" (red) returns to "OK" (blue).

        Tech Tips

        After operating the outer mirror retract switch, if the outer mirror remains in the retracted state, return the outer mirror to the driving position. If "CHK" (red) remains displayed or the "MIRROR SW" inspection result is not normal, perform troubleshooting according to Problem Symptoms Table ("CHK" message(s) are displayed on the "Signal Check" screen) Click here.

    8. HANDLE inspection:


      1. Check that the steering position is displayed correctly for "HANDLE" ("LHD" (blue) or "RHD" (blue)).

        Tech Tips

        If the steering position is not displayed correctly or "CHK" (red) is displayed, perform troubleshooting according to Problem Symptom Table ("CHK" message(s) are displayed on the Signal Check screen) Click here.

    9. DEST inspection:


      1. Check that displayed for "DEST" is matched destination code for vehicles.

        Tech Tips

        If the destination is not displayed correctly or "CHK" (red) is displayed, perform troubleshooting according to Problem Symptom Table ("CHK" message(s) are displayed on the Signal Check screen) Click here.

    10. BODY inspection:


      1. Check that displayed for "BODY" is matched vehicle body information.

    11. T/M inspection:


      1. Check that displayed for "T/M" is matched transmission for vehicles.

    12. D-CAM SET inspection:


      1. Check that "WITH" (blue) is displayed for "D-CAM SET".

    13. Finish diagnostic mode.


  6. CALIBRATION WHEN SERVICING VEHICLE

    Note

    Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the side monitor system may be needed Click here.