| When the front and side monitor main switch on, the front monitor image is not displayed (screen is not black). |
Proceed to ""CHK" Message(s) are Displayed on the SIGNAL CHECK Screen" |
Click here
|
| Data List/Active Test - AISIC Output Status |
Click here
|
| Proceed to "Image from Camera for Parking Assist Monitor is Abnormal" |
Click here
|
| When the front and side monitor main switch on, the front monitor image is not displayed (screen is black). |
Proceed to "Image from Camera for Wide View Front Monitor is Abnormal" |
Click here
|
| When the front and side monitor main switch off, the front monitor image is displayed. |
Proceed to ""CHK" Message(s) are Displayed on the SIGNAL CHECK Screen" |
Click here
|
| Navigation receiver assembly (for Navigation Receiver Type) |
Click here
|
| Radio and display receiver assembly (for Radio and Display Type) |
Click here
|
| When auto-display mode is not set, display does not change from displayed screen even though operating wide view front and side monitor switch while within display permission vehicle speed (approximately 12 km/h [7 mph] or less) |
Proceed to "CHK" message(s) are displayed on the SIGNAL CHECK screen |
Click here
|
| Navigation receiver assembly (for Navigation Receiver Type) |
Click here
|
| Radio and display receiver assembly (for Radio and Display Type) |
Click here
|