REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type) HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips

Use these procedures to troubleshoot the rear view monitor system.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT

    NEXT

  3. CHECK DTC OF NAVIGATION SYSTEM


    1. Refer to DTC Check/Clear procedures of the navigation system.

      Click here

      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

    B

    GO TO NAVIGATION SYSTEM Click here

    A

  4. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom occurs B

    B

    GO TO STEP 6 Click here

    A

  5. SYMPTOM SIMULATION

    Result
    Proceed to
    NEXT

    NEXT

  6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM


    1. Refer to navigation system.

      Click here

      Result
      Result Proceed to
      Symptom does not appear A
      Symptom appears B

    B

    FOLLOW THE NAVIGATION OR AUDIO AND VISUAL SYMPTOM CHART TO PERFORM TROUBLESHOOTING

    A

  7. PROBLEM SYMPTOMS TABLE


    1. Refer to the Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Fault is not listed in problem symptoms table A
      Fault is listed in problem symptoms table B

    B

    ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

    A

  8. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW


    1. Terminals of ECU

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  9. ADJUST, REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT

  10. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END