REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type) TERMINALS OF ECU


  1. CHECK NAVIGATION RECEIVER ASSEMBLY

    A01XJU8E02

    1. Disconnect the H54 and H56 navigation receiver assembly connectors.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
      H54-3 (ACC1) - H54-7 (GND1) GR - BR Power source (ACC) Ignition switch off Below 1 V
      Ignition switch ACC 11 to 14 V
      H54-4 (+B1) - H54-7 (GND1) R - BR Power source (+B) Always 11 to 14 V
      H54-7 (GND1) - Body ground BR - Body ground Ground Always Below 1 Ω
      H56-1 (IG) - H54-7 (GND1) L - BR Power source (IG) Ignition switch off Below 1 V
      Ignition switch ON 11 to 14 V

    3. Reconnect the H54 and H56 navigation receiver assembly connectors.

    4. Measure the voltage and waveform according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
      H56-2 (REV) - H54-7 (GND1) R - W-B Reverse signal Ignition switch ON, shift lever in R 7.5 to 14 V
      Ignition switch ON, shift lever not in R Below 1 V
      H55-11 (CA+) - H55-23 (CGND) B - Shielded Power source Ignition switch ON 5.5 to 7.05 V
      H55-12 (V+) - H55-23 (CGND) R - Shielded Display signal Ignition switch ON, camera lens not covered, displaying an image Pulse generation (See waveform 1)
      Ignition switch ON, camera lens covered, blacking out screen Pulse generation (See waveform 2)
      H55-23 (CGND) - Body ground Shielded - Body ground Shielded ground Always Below 1 V
    5. B001FXOE15
      Text in Illustration
      *a Waveform 1
      *b Waveform 2
      *c Synchronized Signal
      *d Video Waveform

      Using an oscilloscope, check the waveform.


      1. Waveform 1

        Measurement Condition
        Item Content
        Terminal No. (Symbol) H55-12 (V+) - H55-23 (CGND)
        Tool Setting 200 mV/DIV., 50 μs/DIV.
        Condition Ignition switch ON, camera lens not covered, displaying an image

        Tech Tips

        The video waveform changes according to the image sent by the rear television camera assembly.

      2. Waveform 2

        Measurement Condition
        Item Content
        Terminal No. (Symbol) H55-12 (V+) - H55-23 (CGND)
        Tool Setting 200 mV/DIV., 50 μs/DIV.
        Condition Ignition switch ON, camera lens covered, blacking out screen

        Tech Tips

        The video waveform changes according to the image sent by the rear television camera assembly.