PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) DTC CHECK / CLEAR


  1. CHECK DTC (USING GTS)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.

    5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    6. Check for DTCs Click here.

      Note

      The navigation receiver assembly*1 or radio and display receiver assembly*2 outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.


      • *1: for Navigation Receiver Type

      • *2: for Radio and Display Type

      System Proceed to
      Navigation System (for Navigation Receiver Type)

      Click here

      Audio and Visual System (for Radio and Display Type)

      Click here

  2. CLEAR DTC (USING GTS)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.

    5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

    6. Clear the DTCs.

  3. CHECK DTC (USING DIAGNOSTIC MODE)


    1. Refer to navigation system (for Navigation Receiver Type) Click here.

    2. Refer to audio and visual system (for Radio and Display Type) Click here.

  4. CLEAR DTC (USING DIAGNOSTIC MODE)


    1. Refer to navigation system (for Navigation Receiver Type) Click here.

    2. Refer to audio and visual system (for Radio and Display Type) Click here.