TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/o Multi-display) Clearance Warning Buzzer Circuit

DESCRIPTION

The clearance warning buzzer sounds to alert the driver. The sounding pattern changes according to the distance to the obstacle.

WIRING DIAGRAM

B001FLGE07
*a No. 1 Clearance Warning Buzzer
*b Clearance Warning ECU

CAUTION / NOTICE / HINT

Note

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (NO. 1 CLEARANCE WARNING BUZZER - CLEARANCE WARNING ECU)


    1. Disconnect the I1 clearance warning ECU connector.

    2. Disconnect the G161 No. 1 clearance warning buzzer connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      I1-14 (BBZ) - G161-1 (Z+) Always Below 1 Ω
      I1-12 (EF) - G161-2 (Z-) Always Below 1 Ω
      I1-14 (BBZ) - Body ground Always 10 kΩ or higher
      I1-12 (EF) - Body ground Always 10 kΩ or higher

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR