| DTC Code | DTC Name |
|---|---|
| C1AE6 | Rear Left Sensor Malfunction |
DESCRIPTION
The No. 1 ultrasonic sensor (rear corner sensor LH) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (rear corner sensor LH). If the No. 1 ultrasonic sensor (rear corner sensor LH) has an open circuit or other malfunction, it will not function normally.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE6 | A malfunction of the No. 1 ultrasonic sensor (rear corner sensor LH). |
|
CAUTION / NOTICE / HINT
Note
If the DTC is output after repairs, turn the ignition switch ON and turn the back sonar or clearance sonar switch assembly is on. Then clear the DTC Click here.
PROCEDURE
CHECK FOR DTC
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| No DTC is output | A |
| Only DTC C1AE6 is output | B |
| DTC C1AE6 and C1AED are output | C |
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| C |
|
GO TO DTC (C1AED) Click here |
| B |
|
REPLACE NO. 1 ULTRASONIC SENSOR (REAR CORNER SENSOR LH)
Replace the No. 1 ultrasonic sensor (rear corner sensor LH) with a normally functioning sensor Click here.
Tech Tips
All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
| NEXT |
|
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| No DTC is output | A |
| DTC C1AE6 is output (for LHD) | B |
| DTC C1AE6 is output (for RHD) | C |
| A |
|
END (NO. 1 ULTRASONIC SENSOR WAS DEFECTIVE) |
| B |
|
REPLACE CLEARANCE WARNING ECU Click here |
| C |
|
REPLACE CLEARANCE WARNING ECU Click here |