TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/ Multi-display), Diagnostic DTC:C1AE3

DTC Code DTC Name
C1AE3 Front Right Center Sensor

DESCRIPTION

The No. 1 ultrasonic sensor (front center sensor RH) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front center sensor RH). If the No. 1 ultrasonic sensor (front center sensor RH) has an open or other malfunction, it will not function normally.

DTC Code DTC Detection Condition Trouble Area
C1AE3 A malfunction of the No. 1 ultrasonic sensor (front center sensor RH).

  • No. 1 ultrasonic sensor (front center sensor RH)

  • Clearance warning ECU

CAUTION / NOTICE / HINT

Note

If the DTC is output after repairs, turn the ignition switch ON and turn the back sonar or clearance sonar switch assembly is on. Then clear the DTC Click here.

PROCEDURE


  1. CHECK FOR DTC


    1. Check for DTCs Click here.

      Result
      Result Proceed to
      No DTC is output A
      Only DTC C1AE3 is output B
      DTC C1AE3 and C1AEC are output C

    A

    USE SIMULATION METHOD TO CHECK Click here

    C

    GO TO DTC (C1AEC) Click here

    B

  2. REPLACE NO. 1 ULTRASONIC SENSOR (FRONT CENTER SENSOR RH)


    1. Replace the No. 1 ultrasonic sensor (front center sensor RH) with a normally functioning sensor Click here.

      Tech Tips

      All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.


    NEXT

  3. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      Result
      Result Proceed to
      No DTC is output A
      DTC C1AE3 is output (for LHD) B
      DTC C1AE3 is output (for RHD) C

    A

    END (NO. 1 ULTRASONIC SENSOR WAS DEFECTIVE)

    B

    REPLACE CLEARANCE WARNING ECU Click here

    C

    REPLACE CLEARANCE WARNING ECU Click here