TELEPHONE ANTENNA REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE TELEPHONE ANTENNA ASSEMBLY


    1. B001DG5

      Disconnect the connector.

    2. B001G3U

      Remove the bolt and then remove the washer and holder.

    3. B001CN9

      Remove the telephone antenna assembly of the vehicle outside.

    4. B001IBYN01

      Detach the claws and guides and remove the telephone antenna assembly as indicated by the arrows in the order shown in the illustration.

    5. When reusing the telephone antenna assembly:


      1. B001F1Y

        Remove the seal.

  5. REMOVE TELEPHONE ANTENNA CORD SUB-ASSEMBLY


    1. B001HBC

      Detach the 2 claws and remove the telephone antenna cord sub-assembly.