TELEMATICS SYSTEM, Diagnostic DTC:B15F0

DTC Code DTC Name
B15F0 VIN Not Programmed or Mismatch - DCM

DESCRIPTION

This DTC is stored when the Vehicle Identification Number (VIN) is not stored in the telematics transceiver or when the VIN stored in the telematics transceiver and the VIN stored in the ECM do not match.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15F0 VIN Not Programmed or Mismatch - DCM

When either of the following conditions is met:


  • The VIN is not stored in the telematics transceiver.

  • The VIN stored in the telematics transceiver and the VIN stored in the ECM do not match.

  • SFI system

  • ECD system

  • CAN communication system

PROCEDURE


  1. REGISTER VIN


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON and wait for 10 seconds.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / Telematics / Utility / Vin Synchronization

    6. According to the display on the GTS, perform VIN Synchronization to register the VIN to the telematics transceiver.

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK DTC


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON and wait for 20 seconds.

    4. Turn the GTS on.

    5. Check for DTCs and check that no DTCs are output.

      Click here

      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

  3. CHECK CAN COMMUNICATION SYSTEM


    1. Check if CAN communication system DTCs are output.

      for LHD with Entry and Start System: Click here

      for LHD without Entry and Start System: Click here

      OK
      CAN communication system DTCs are not output.
      Result
      Result Proceed to
      OK (SFI SYSTEM) A
      OK (ECD SYSTEM) B
      NG C

    A

    GO TO SFI SYSTEM for 1GR-FE: Click here
    GO TO SFI SYSTEM for 2TR-FE: Click here

    B

    GO TO ECD SYSTEM Click here

    C

    GO TO CAN COMMUNICATION SYSTEM for LHD with Entry and Start System: Click here
    GO TO CAN COMMUNICATION SYSTEM for LHD without Entry and Start System: Click here