NAVIGATION ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TELEPHONE ANTENNA CORD SUB-ASSEMBLY


    1. Connect the connector to install the telephone antenna cord sub-assembly.

  2. INSTALL NAVIGATION ECU


    1. A01XHCB

      Insert the navigation ECU as shown in the illustration.

    2. Install the navigation ECU with the 4 bolts.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

    3. Attach the clamp.

    4. Connect the connector.

  3. INSTALL NO. 1 NAVIGATION WIRE


    1. Connect each connector to install the No. 1 navigation wire.

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here