NAVIGATION SYSTEM(for Navigation Receiver Type) Voice is not Recognized

CAUTION / NOTICE / HINT

Tech Tips

When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for T-Connect (w/ T-Connect Function).

PROCEDURE


  1. CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)


    1. B001F27

      Enter the "Microphone Check" screen. [Refer to Check Mic&Voice Recognition in Operation Check Click here]

    2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

    3. Push the recording switch and perform voice recording.


      • Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

      • Voice can be recorded for up to 5 seconds.

    4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

      OK
      All check results are normal.

    OK

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here