| DTC Code | DTC Name |
|---|---|
| B1579 | Voice Recognition Microphone Disconnected |
DESCRIPTION
The radio and display receiver assembly and map light assembly (telephone microphone assembly) are connected to each other using the microphone connection detection signal lines.
This DTC is stored when a microphone connection detection signal line is disconnected.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1579 | Telephone microphone signal is lost. |
|
WIRING DIAGRAM
PROCEDURE
CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
| *a | Component with harness connected (Radio and Display Receiver Assembly) |
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | |||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Measure the voltage according to the value(s) in the table below.
| Standard Voltage | ||||||
|---|---|---|---|---|---|---|
|
| NG |
|
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here |
| OK |
|
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - MAP LIGHT ASSEMBLY)
Disconnect the H51 radio and display receiver assembly connector.
Disconnect the W7 map light assembly connector.
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
| OK |
|
CHECK TELEPHONE MICROPHONE ASSEMBLY
Replace the telephone microphone assembly with a known good one Click here.
Check for DTCs Click here.
| OK |
|---|
| No DTCs are output. |
| OK |
|
END (TELEPHONE MICROPHONE ASSEMBLY IS DEFECTIVE) |
| NG |
|
REPLACE MAP LIGHT ASSEMBLY Click here |