NOISE FILTER REMOVAL

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM COVER

    Click here

  5. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE TOOL CASE

    Click here

  7. REMOVE BACK DOOR LOCK COVER (w/o Back Door Tire Carrier)

    Click here

  8. REMOVE BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type)

    Click here

  9. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  10. REMOVE RADIO SETTING CONDENSER

    Note

    If it is necessary to replace the radio setting condenser or terminal cover, both parts must be replaced as they are supplied as a set.


    1. A01XF2TE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 8 claws and remove the terminal cover with wire harness from the condenser.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01XD6X

      Remove the bolt.

    3. Detach the clamp from the vehicle body and remove the condenser.