STEREO JACK ADAPTER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL HEADPHONE TERMINAL

   
   

   1. 

      Attach the 4 claws to install the 2 headphone terminals.

   2. Attach the 2 clamps and connect the 2 connectors.

2. INSTALL VIDEO (VIDEO ADAPTER) TERMINAL

   
   

   1. 

      Attach the 4 claws to install the video terminal.

   2. Attach the clamp and connect the connector.

3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

   Click here

4. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Automatic Transmission)

   
   

   1. Attach the 2 claws to install the stereo jack adapter.

5. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Manual Transmission)

   
   

   1. Attach the 2 claws to install the stereo jack adapter.

6. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)

   Click here

7. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

   Click here

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

9. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

   Click here

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

13. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

14. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.