INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Install the front No. 4 speaker assembly with the 2 screws.

      Note


      • Do not touch the cone of the speaker.

      • When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.

  2. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

    Click here

  4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Install the front No. 2 speaker assembly with the 2 screws.

      Note


      • Do not touch the cone of the speaker.

      • When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.

  5. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL FRONT PILLAR GARNISH LH

    Click here

  7. INSTALL NO. 1 ASSIST GRIP

    Click here

  8. INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.