RADIO RECEIVER(for Radio Receiver Type) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL RADIO RECEIVER ASSEMBLY


    1. Connect each connector.

    2. B001FM4

      Insert the radio receiver assembly to attach the 2 guides on its backside.

      Note

      When inserting the receiver, do not press the knobs on it.

    3. Install the radio receiver assembly with the 4 bolts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

  4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. B001HCI

      Attach the 10 clips to install the center instrument cluster finish panel assembly.

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here