RADIO RECEIVER(for Radio Receiver Type) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL RADIO RECEIVER ASSEMBLY


    1. Connect each connector.

    2. A01XFS7

      Insert the radio receiver assembly to attach the 2 guides on its backside.

      Note

      When inserting the receiver, do not press the knobs on it.

    3. Install the radio receiver assembly with the 4 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A01XHED

      Attach the 10 clips to install the instrument cluster finish panel assembly.

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    Click here