REAR DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)


    1. B001E84E01

      Align the speaker with the door position pins labeled A.

    2. Install the rear No. 2 speaker with the 2 screws.

      Note

      Do not touch the cone of the speaker.

  2. INSTALL REAR SPEAKER SET


    1. B001CCPE02

      Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.

    2. Install the rear speaker set with the 3 screws in the order shown in the illustration.

      Note

      Do not touch the cone of the speaker.

    3. Connect the connector.

  3. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  5. INSTALL ASSIST GRIP COVER LH

    Click here

  6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.