REAR DOOR SPEAKER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH

    Click here

  4. REMOVE ASSIST GRIP COVER LH

    Click here

  5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  6. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  7. REMOVE REAR SPEAKER SET


    1. B001CCP

      Disconnect the connector.

    2. Remove the 3 screws.

    3. Detach the 2 claws and remove the rear speaker set.

      Note

      Do not touch the cone of the speaker.

  8. REMOVE REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)


    1. B001GKY

      Remove the 2 screws and No. 2 speaker.

      Note

      Do not touch the cone of the speaker.