HEATED STEERING WHEEL CONTROLLER REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing the steering wheel Click here.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 3 STEERING WHEEL LOWER COVER

    Click here

  3. REMOVE NO. 2 STEERING WHEEL LOWER COVER

    Click here

  4. REMOVE STEERING PAD ASSEMBLY

    Click here

  5. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. A01XJ3P

      Disconnect the 2 connectors and connector clamp.

    2. Remove the 2 screws and steering wheel heater control assembly.