STEERING WHEEL REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing the steering wheel Click here.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 3 STEERING WHEEL LOWER COVER

    Click here

  4. REMOVE NO. 2 STEERING WHEEL LOWER COVER

    Click here

  5. REMOVE STEERING PAD

    Click here

  6. REMOVE NO. 1 STEERING WHEEL ORNAMENT


    1. A01XLD7

      Remove the 2 screws.

    2. Detach the claw, 3 guide pins and then remove the ornament.

  7. REMOVE NO. 2 STEERING WHEEL ORNAMENT


    1. Remove the 2 screws.

    2. Detach the claw, 3 guide pins and then remove the ornament.

      Tech Tips

      Refer to "Remove No. 1 Steering Wheel Ornament".

  8. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)


    1. Disconnect the connector.

    2. Remove the 4 screws.

    3. Detach the 2 claws, 6 guide pins and then remove the steering pad switch assembly.

      Tech Tips

      Refer to "Remove No. 1 Steering Wheel Ornament".

  9. REMOVE STEERING PAD SWITCH RH (w/ Steering Pad Switch)


    1. Disconnect the connector.

    2. Remove the 2 screws.

    3. Detach the claw, 3 guide pins and steering pad switch RH.

      Tech Tips

      Refer to "Remove No. 1 Steering Wheel Ornament".

  10. REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

    Click here

  11. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater)

    Click here

  12. REMOVE STEERING WHEEL ASSEMBLY


    1. Remove the steering wheel set nut.

    2. A01XJYYE03
      Text in Illustration
      *a Matchmark
      *b Hold
      *c Turn

      Put matchmarks on the steering wheel and main shaft.

    3. Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05011 )