STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) REASSEMBLY

PROCEDURE


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. B001F6O

      Attach the claw to Install the multiplex tilt and telescopic ECU.

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

    Tech Tips

    When replacing the steering lock actuator assembly, refer to the Service Bulletin.


    1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

    2. B001G2C

      Tighten the 2 tapered-head bolt until the bolt heads breaks off.