STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) REASSEMBLY

PROCEDURE


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. Install the ECU with the bolt.

      Torque:
      2.8 N*m  { 28 kgf*cm, 24 in.*lbf }

    2. Connect the connector.

      Note

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

    Tech Tips

    When replacing the steering lock actuator assembly, refer to the Service Bulletin.


    1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

    2. B001G2C

      Tighten the 2 tapered-head bolt until the bolt heads breaks off.