STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) DISASSEMBLY

PROCEDURE


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

    3. B001GTW

      Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.

  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. B001F6O

      Detach the claw to remove the multiplex tilt and telescopic ECU.