STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) DISASSEMBLY

PROCEDURE


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

    3. B001GTW

      Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.

  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. A01XDW6

      Disconnect the connector.

    2. Remove the bolt and ECU.