STEERING COLUMN ASSEMBLY(for Manual Tilt and Manual Telescopic Steering Column) INSPECTION

PROCEDURE

1. INSPECT STEERING COLUMN ASSEMBLY

   
   

   1. 

      Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

      Standard Dimension
      A B 2 mm (0.0787 in.) 12.7 mm (0.5 in.)

      If the capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.

   2. Check the 2 capsules for deformation and damage.

      If the capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.