POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA

    Note


    • Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.

    • Turn the ignition switch to ON and park the vehicle on level ground. Check the freeze frame data by using the GTS.


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Check the freeze frame data.

    6. Enter the following menus: Body Electrical / Tilt & Telescopic / Trouble Codes.

      Tilt & Telescopic
      Tester Display
      Tilt Position
      Telesco Position
      Tilt Return Position
      Telesco Return Position
      Tilt Up Switch
      Tilt Up SW(CAN)
      Tilt Down Switch
      Tilt Down SW(CAN)
      Telesco Short Switch
      Telesco Short SW(CAN)
      Telesco Long Switch
      Telesco Long SW(CAN)
      T&T Manual SW Data
      Power Source Voltage
      Freeze Speed Info
      IG Switch (CAN)
      IG Switch
      Receive from Meter
      Receive from Seat ECU
      Receive from Combi
      J/B
      Handle Position
      The Number of DTCs