POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • *: Use the intelligent tester.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result
    Proceed to
    NEXT

    NEXT

  3. CHECK CAN COMMUNICATION SYSTEM*


    1. Use the GTS to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to
      CAN DTC is not output. A
      CAN DTC is output (for LHD with Entry and Start System). B
      CAN DTC is output (for RHD with Entry and Start System). C

    B

    GO TO CAN COMMUNICATION SYSTEM (for LHD with Entry and Start System) ( HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    C

    GO TO CAN COMMUNICATION SYSTEM (for RHD with Entry and Start System) (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    A

  4. CHECK FOR DTCs*


    1. Check for DTCs.

      Click here

    2. Clear the DTC(s)

      Click here

    3. Recheck for DTCs

      Click here

      Result
      Result Proceed to
      DTC is not output. A
      DTC is output. B

    B

    GO TO DIAGNOSTIC TROUBLE CODE CHART Click here

    A

  5. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to
      Fault is not listed in problem symptoms table. A
      Fault is listed in problem symptoms table. B

    B

    GO TO STEP 7 Click here

    A

  6. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Terminals of ECU.

      Click here

    2. Data List / Active Test.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  7. REPAIR

    Result
    Proceed to
    NEXT

    NEXT

  8. CONFIRMATION TEST

    Result
    Proceed to
    NEXT

    NEXT

    END