VANE PUMP(for 5L-E) INSTALLATION

PROCEDURE

1. INSTALL VANE PUMP ASSEMBLY

   
   
   1. 

      Text in Illustration

      *1	A
      *2	B
      *3	C

      Install the vane pump with the 2 bolts and nut.

      Torque:

      for bolt A

      48 N*m  { 489 kgf*cm, 35 ft.*lbf }

      for nut C

      64 N*m  { 653 kgf*cm, 47 ft.*lbf }

      Tech Tips

      Turn nut C while holding bolt B.

2. INSTALL VANE PUMP PULLEY

   
   
   1. 

      Text in Illustration

      *a

      Turn

      Using SST, install the vane pump pulley to the vane pump.

      SST

      09960-10010   ( 09962-01000, 09963-01000 )

      Torque:

      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

3. INSTALL FAN SHROUD

   
   

   1. Install the fan shroud Click here.

4. CONNECT PRESSURE FEED TUBE ASSEMBLY

   
   

   1. Install a new gasket to the pressure feed tube.

   2. Connect the pressure feed tube to the vane pump with the union bolt.

      Torque:

      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

      Tech Tips

      Make sure the stopper of the pressure feed tube touches the vane pump.

5. CONNECT OIL RESERVOIR TO NO. 1 PUMP HOSE

   
   

   1. Connect the hose to the vane pump with the clip.

6. INSTALL VANE PUMP V BELT

   Click here

7. ADD POWER STEERING FLUID

8. BLEED AIR FROM POWER STEERING FLUID

   Click here

9. CHECK FOR POWER STEERING FLUID LEAK