VANE PUMP(for 5L-E) DISASSEMBLY

PROCEDURE


  1. REMOVE SUCTION PORT UNION


    1. A01XLGV

      Remove the bolt and power steering suction port union.

    2. Using a screwdriver, remove the O-ring from the power steering suction port union.

  2. REMOVE FLOW CONTROL VALVE


    1. A01XLRB

      Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve and compression spring.

  3. REMOVE VANE PUMP REAR HOUSING


    1. A01XGMC

      Remove the 4 bolts and vane pump rear housing.

    2. Remove the gasket.

    3. Remove the 2 O-rings from the vane pump rear housing.

  4. REMOVE VANE PUMP REAR SIDE PLATE


    1. Remove the wave washer from the vane pump rear side plate.

    2. A01XCQY

      Remove the vane pump rear side plate.

  5. REMOVE VANE PUMP CAM RING


    1. A01XIE1

      Remove the vane pump cam ring.

  6. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates.

    2. A01XM2G

      Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.

    3. Remove the vane pump rotor.

  7. REMOVE VANE PUMP SHAFT


    1. Remove the vane pump shaft from the vane pump front housing.

  8. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A01XCLOE02
      Text in Illustration
      *1 Cloth

      Using a screwdriver, pry out the vane pump housing oil seal.

      Note

      Be careful not to damage the vane pump front housing.