VANE PUMP(for 1GD-FTV) INSTALLATION

PROCEDURE

1. INSTALL VANE PUMP ASSEMBLY

   
   

   1. Install the 2 bolts and vane pump assembly.

   2. Connect the connector to the vane pump assembly.

2. CONNECT PRESSURE FEED TUBE ASSEMBLY

   
   

   1. Install a new gasket to the pressure feed tube assembly.

      Torque:

      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

   2. Connect the connector to the vane pump assembly.

3. CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE

   
   

   1. Connect the No. 1 oil reservoir to pump hose to the vane pump assembly and slide the hose clip.

4. INSTALL FAN AND GENERATOR V BELT

   Click here

5. INSTALL INTERCOOLER AIR HOSE

   Click here

6. ADD POWER STEERING FLUID

7. BLEED POWER STEERING FLUID

   Click here

8. INSPECT POWER STEERING FLUID LEAK

9. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here