VANE PUMP(for 1GD-FTV) DISASSEMBLY

PROCEDURE


  1. SECURE VANE PUMP ASSEMBLY


    1. A01XCKTE01

      Using SST, secure the vane pump assembly in a vise.

      SST
      09630-00014   ( 09631-00132 )

  2. REMOVE SUCTION PORT UNION


    1. A01XFFP

      Remove the bolt and suction port union.

    2. Remove the O-ring from the suction port union.

  3. REMOVE VANE PUMP REAR HOUSING


    1. A01XG5M

      Remove the 4 bolts and vane pump rear housing.

    2. Remove the O-ring from the vane pump rear housing.

  4. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates.

      Note

      Take care not to drop the vane pump plates.

    2. Remove the vane pump rotor.

  5. REMOVE VANE PUMP SHAFT WITH PULLEY


    1. A01XDTB

      Using 2 screwdrivers, remove the snap ring from the vane pump shaft with pulley.

    2. Remove the vane pump shaft with pulley.

  6. REMOVE VANE PUMP CAM RING


    1. Remove the vane pump cam ring from the vane pump front housing.

  7. REMOVE FRONT VANE PUMP SIDE PLATE


    1. Remove the front vane pump side plate from the vane pump front housing.

    2. A01XH8H

      Remove the O-ring from the front vane pump side plate.

    3. A01XEC6

      Remove the O-ring from the vane pump front housing.

  8. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A01XDPLE01
      Text in Illustration
      *a Cloth

      Using a screwdriver and piece of cloth, pry out the vane pump housing oil seal.

      Note

      Be careful not to damage the vane pump front housing.