VANE PUMP(for 1GD-FTV) REMOVAL

CAUTION / NOTICE / HINT

Note


  • When using a vise, do not overtighten it.

  • When installing the parts indicated by arrows, coat them with power steering fluid Click here.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 2 INTERCOOLER AIR HOSE

    Click here

  4. REMOVE FAN AND GENERATOR V BELT

    Click here

  5. REMOVE NO. 1 OIL RESERVOIR TO PUMP HOSE


    1. B001E3D

      Slide the clip and disconnect the No. 1 oil reservoir to pump hose.

  6. REMOVE PRESSURE FEED TUBE ASSEMBLY


    1. B001DM2

      Disconnect the connector from the vane pump assembly.

    2. B001CXX

      Remove the union bolt and pressure feed tube assembly from the vane pump assembly.

    3. Remove the gasket from the pressure feed tube assembly.

  7. REMOVE VANE PUMP ASSEMBLY


    1. Disconnect the connector from the vane pump assembly.

    2. B001GGQ

      Remove the 2 bolts and vane pump assembly.