PARKING BRAKE ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL LH

  2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. A01XFPM

      Remove the 2 bolts and disconnect the rear disc brake cylinder.

      Note


      • Do not disconnect the flexible hose from the disc brake cylinder.

      • Do not twist or bend the flexible hose.

    2. Hang the disc brake cylinder with a piece of wire.

  3. REMOVE REAR DISC

    Click here

  4. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A01XM3M

      Remove the 2 parking brake shoe return tension springs.

  5. DISCONNECT NO. 1 PARKING BRAKE SHOE ASSEMBLY LH


    1. A01XGWS

      Remove the parking brake shoe hold down spring cups and parking brake shoe hold down spring to disconnect the No. 1 parking brake shoe assembly from the backing plate.

  6. REMOVE PARKING BRAKE SHOE STRUT LH


    1. A01XC93

      Remove the parking brake shoe strut and parking brake shoe strut compression spring.

  7. DISCONNECT NO. 2 PARKING BRAKE SHOE ASSEMBLY LH


    1. A01XHNU

      Remove the parking brake shoe hold down spring cup and parking brake shoe hold down spring to disconnect the No. 2 parking brake shoe assembly from the backing plate.

  8. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A01XHTP

      Remove the parking brake shoe adjusting screw set.

  9. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH


    1. A01XG74

      Disconnect the parking brake shoe return tension spring to remove the No. 1 parking brake shoe assembly.

  10. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A01XIZ7

      Remove the parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.

  11. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER


    1. A01XKZJ

      Using needle-nose pliers, disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.

      Note

      Be careful not to damage the No. 3 parking brake cable assembly.

  12. REMOVE PARKING BRAKE SHOE LEVER LH


    1. A01XMIS

      Remove the C-washer, shim and parking brake shoe lever from the No. 2 parking brake shoe assembly as shown in the illustration.

  13. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN


    1. Remove the parking brake shoe hold down spring pin (for front side).

    2. Remove the parking brake shoe hold down spring pin (for rear side).