PARKING BRAKE LEVER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR CONSOLE BOX ASSEMBLY


    1. for Automatic Transmission:

      Remove the rear console box assembly Click here.

    2. for Manual Transmission:

      Remove the rear console box assembly Click here.

    3. w/ Refrigerated Cool Box:

      Remove the rear console box assembly Click here.

    4. for Bench Seat Type:

      Remove the rear console box assembly Click here.

  2. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY


    1. Release the parking brake lever.

    2. Disconnect the parking brake switch connector.

    3. B001DMC

      Remove the adjusting nut.

    4. B001HVT

      Disconnect the No. 2 parking brake cable and No. 3 parking brake cable from the No. 1 parking brake pull rod.

    5. Remove the No. 1 parking brake pull rod, bush and compression spring from the parking brake lever.

    6. Remove the straight pin from the parking brake lever.

    7. B001G6D

      Remove the 4 bolts and parking brake lever.

  3. REMOVE PARKING BRAKE SWITCH ASSEMBLY

    Click here