DRIVE BELT(for 5L-E) ON-VEHICLE INSPECTION

PROCEDURE


  1. CHECK DRIVE BELT TENSION


    1. A01XIHRE04
      Text in Illustration
      *a Clearance
      *b Correct
      *c Incorrect

      Visually check the belt for cracks, oiliness or wear. Check that the belt does not touch the bottom of the pulley groove.

      If necessary, replace the belt.

    2. A01XJPLE03
      Text in Illustration
      *a Crankshaft Pulley
      *b Vane Pump Pulley
      B001CHY Measuring Point for Belt Deflection

      Check the drive belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.

      Standard Drive Belt Deflection
      Item Specified Condition
      New belt

      8.0 to 10 mm

      (0.315 to 0.393 in.)
      Used belt

      10 to 15 mm

      (0.394 to 0.590 in.)

      If necessary, adjust the drive belt deflection.

    3. Using a belt tension gauge, check the drive belt tension.

      Standard Drive Belt Tension
      Item Specified Condition
      New belt

      441 to 539 N

      (45 to 55 kgf, 99.2 to 121 lbf)
      Used belt

      196 to 343 N

      (20 to 35 kgf, 44.1 to 77.1 lbf)

      • If the belt tension is not as specified, adjust it.