VANE PUMP(for 1GR-FE) REMOVAL

CAUTION / NOTICE / HINT

Note


  • When using a vise, do not overtighten it.

  • When installing the parts indicated by arrows, coat them with power steering fluid Click here.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT WHEEL RH

  3. REMOVE FRONT FENDER APRON SEAL RH

    Click here

  4. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CAP AND HOSE

    Click here

  6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  7. REMOVE AIR CLEANER CASE

  8. REMOVE FAN AND GENERATOR V BELT

    Click here

  9. DISCONNECT POWER STEERING OIL PRESSURE SWITCH CONNECTOR


    1. B001EAA

      Disconnect the 2 connectors.

  10. DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE


    1. B001H47

      Slide the clip and disconnect the oil reservoir to pump hose from the vane pump.

  11. DISCONNECT PRESSURE FEED TUBE


    1. B001I28

      Remove the union bolt and disconnect the pressure feed tube.

    2. Remove the gasket.

  12. REMOVE VANE PUMP ASSEMBLY


    1. B001DMT

      Remove the bolt and harness bracket.

    2. B001FA5

      Remove the 2 bolts and vane pump.