VANE PUMP(for 1GR-FE) DISASSEMBLY

PROCEDURE


  1. SECURE VANE PUMP ASSEMBLY


    1. A01XLE0E02

      Using SST, secure the vane pump in a vise.

      SST
      09630-00014   ( 09631-00132 )

  2. REMOVE SUCTION PORT UNION


    1. A01XL8G

      Remove the bolt and suction port union from the vane pump.

    2. Using a screwdriver, remove the O-ring from the suction port union.

  3. REMOVE VANE PUMP REAR HOUSING


    1. A01XJDW

      Remove the 4 bolts and vane pump rear housing from the vane pump front housing.

    2. A01XFZR

      Using a screwdriver, remove the O-ring from the vane pump rear housing.

  4. REMOVE VANE PUMP SHAFT WITH PULLEY


    1. A01XHH1

      Using 2 screwdrivers, remove the snap ring from the vane pump shaft.

    2. Remove the vane pump shaft with pulley.

      Note

      Be careful not to drop or damage the vane pump shaft with vane pump pulley.

      If it is damaged, replace the vane pump assembly.

  5. REMOVE VANE PUMP ROTOR

    A01XG0R

    1. Remove the 10 vane pump plates.

      Note

      Take care not to drop the vane pump plates.

    2. Remove the vane pump rotor from the vane pump front housing.

  6. REMOVE VANE PUMP CAM RING

    A01XKLH

    1. Remove the cam ring from the vane pump front housing.

  7. REMOVE VANE PUMP FRONT SIDE PLATE


    1. A01XMPB

      Remove the front side plate from the vane pump front housing.

    2. A01XKQF

      Using a screwdriver, remove the O-ring from the front side plate.

    3. A01XEN5

      Remove the O-ring from the vane pump front housing.

  8. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A01XK9PE03
      Text in Illustration
      *a Cloth

      Using a screwdriver and piece of cloth, pry out the oil seal.

      Note

      Be careful not to damage the vane pump front housing.