VACUUM PUMP(for 1GD-FTV) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

The vacuum pump assembly is listed as one of the 200000 km (124000 mile) maintenance parts. Make sure to disassemble and inspect it every 200000 km (124000 mile) and replace parts as necessary.

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY

    Click here

  2. INSTALL ENGINE ASSEMBLY TO ENGINE STAND

    Click here

  3. DISCONNECT NO. 1 VACUUM TRANSMITTING HOSE


    1. A01XM9F

      Disconnect the No. 1 vacuum transmitting hose from the vacuum pump assembly.

  4. REMOVE VACUUM PUMP ASSEMBLY


    1. A01XLLH

      Remove the 3 bolts and vacuum pump assembly from the engine assembly.

    2. Remove the No. 2 and No. 3 O-rings from the vacuum pump assembly.

  5. REMOVE CAMSHAFT OIL SEAL RETAINER

    Click here

  6. REMOVE VACUUM PUMP UNION


    1. Mount the vacuum pump assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the vacuum pump assembly.

    2. Remove the union bolt, vacuum pump union and 2 gaskets from the vacuum pump assembly.