VACUUM PUMP(for 5L-E) DISASSEMBLY

PROCEDURE


  1. REMOVE VACUUM PUMP PULLEY


    1. A01XDCD

      Using soft jaws, place the vacuum pump in a vise, and then remove the pulley lock nut and pulley.

  2. REMOVE VACUUM PUMP VACUUM HOSE UNION


    1. A01XKVWE01

      Using SST, hold the check valve assembly, and then remove the union bolt, vacuum hose union and 2 gaskets.

      SST
      09922-10010

  3. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. A01XFSV

      Remove the check valve assembly and gasket.

  4. REMOVE VACUUM PUMP END COVER


    1. A01XI9U

      Remove the 4 screws and end cover.

  5. REMOVE VACUUM PUMP SHAFT


    1. A01XGA3

      Using a plastic-faced hammer, tap out the vacuum pump shaft together with the bearing.

  6. REMOVE STOP RING


    1. Remove the stop ring from the vacuum pump shaft.

  7. REMOVE VACUUM PUMP BEARING


    1. A01XKAH

      Using a press, press out the bearing from the rotor shaft.

  8. REMOVE VACUUM PUMP BLADE


    1. A01XJGY

      Remove the 2 screws and end plate.

    2. A01XEPO

      Remove the rotor and 5 pump blades.

  9. REMOVE O-RING


    1. Remove the O-ring from the case.

  10. REMOVE OIL SEAL


    1. A01XD92

      Using a screwdriver, remove the oil seal.