DOWNHILL ASSIST CONTROL SWITCH INSPECTION

PROCEDURE


  1. CHECK SUSPENSION CONTROL SWITCH (DOWNHILL ASSIST CONTROL SWITCH)


    1. A01XL1EE04
      Text in Illustration
      *a

      Component without harness connected

      (Downhill Assist Control Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 4 Pressed Below 1 Ω
      Not pressed 10 kΩ or higher

      If the result is not as specified, replace the suspension control switch.