VSC OFF SWITCH(w/ Combination Switch) INSPECTION

PROCEDURE


  1. INSPECT COMBINATION SWITCH ASSEMBLY (VSC OFF SWITCH)


    1. B001DVQC15
      *a

      Component without harness connected

      Combination Switch Assembly (VSC OFF Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (OFF) - 24 (E) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the combination switch assembly (VSC OFF switch).

    2. B001DVQC16
      *a

      Component without harness connected

      Combination Switch Assembly (VSC OFF Switch)

      Apply battery voltage between the terminals of the switch, and check the illumination condition of the combination switch assembly (VSC OFF switch).

      Standard
      Measurement Condition Specified Condition

      Battery positive (+) → 13 (ILL+)

      Battery negative (-) → 12 (ILL-)

      		 Illuminates

      If the result is not as specified, replace the combination switch assembly (VSC OFF switch).