INNER REAR VIEW MIRROR INSTALLATION

PROCEDURE


  1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-crash Safety System)


    1. w/o EC Mirror:


      1. B001H6KC01
        B001CHY "TORX" screw
        B001DEF Install in this Direction

        Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.

      2. Using a T20 ''TORX'' socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

        Torque:
        1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

    2. w/ EC Mirror:


      1. B001EOLC01
        B001CHY Connector
        B001DEF Install in this Direction

        Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.

      2. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

        Torque:
        1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

      3. Connect the connector.

  2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-crash Safety System, w/ EC Mirror)


    1. Attach the claw and temporarily install the inner rear view mirror stay holder cover.

    2. B001D9D

      Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration and attach the 2 claws to install the inner rear view mirror stay holder cover.

  3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-crash Safety System)


    1. w/o EC Mirror:


      1. B001H2XC01
        B001CHY "TORX" screw
        B001DEF Install in this Direction

        Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.

      2. Using a T20 ''TORX'' socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

        Torque:
        1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

    2. w/ EC Mirror:


      1. B001IMU

        Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.

      2. Using a T20 ''TORX'' socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

        Torque:
        1.5 N*m  { 15 kgf*cm, 13 in.*lbf }
      3. B001DUF

        Attach the clamp.

      4. Connect the connector.

  4. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

    Click here

  5. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

    Click here